Parts
This newest version of the Mothbox is super fast to assemble! You only need
- Mothbox PCB
- Arducam 64mp camera (owlsight)
- Raspberry Pi 5
- 32 MB A1 SD card (and better, more GB, A2 speed)
- Battery
and you are set!
Attractors
- Mothbeams can plug right in to the PCB
- External - You can also connect any 12V attractor you want via the “External attractor” port
Bonus Parts
You can also add:
- Cheap Epaper display - ($15USD) to know what your Mothbox is up to!
- External temperature sensor - Connects to a port on the PCB
- Cheap GPS - gives super accurate timestamps and can automatically locate your mothbox - plugs in to ports on PCB - 5 pin or 4 pin
Cases
It can fit in the Mothbox DIY case, or even better, you can now 3D print your own case!
Follow these instructions to put it all together!